AutoCAD(오토캐드), 객체 간격 복사, offset

AutoCAD(오토캐드), 객체 간격 복사, offset

 

 

offset 명령은 객체를 지정한 방향과 거리만큼 간격을 띄우고 복사할 때 사용합니다.

원과 호처럼 닫혀있는 객체는 지정 방향에 따라 커지거나 작아집니다.

 

 

Command: line

Specify first point: 3,3

Specify next point or [Undo]: @5<0

Specify next point or [Undo]: (Enter키)

 

 

Command: offset

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] <3.0000>: 3

Select object to offset or [Exit/Undo] <Exit>: (선 A 선택)

Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: (선 위쪽 아무 곳이나 선택)

Select object to offset or [Exit/Undo] <Exit>: (Enter키)

 

 

Command: line

Specify first point: 4,2

Specify next point or [Undo]: @5<90

Specify next point or [Undo]: (Enter키)

 

 

Command: offset

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] <3.0000>: 3

Select object to offset or [Exit/Undo] <Exit>: (선 B 선택)

Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: (선 오른쪽 아무 곳이나 선택)

Select object to offset or [Exit/Undo] <Exit>: (Enter키)

 

 

Command: c

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 5.5,12

Specify radius of circle or [Diameter]: d

Specify diameter of circle: 3

 

 

Command: offset

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] <3.0000>: 1

Select object to offset or [Exit/Undo] <Exit>: (원 A 선택)

Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: (원 바깥쪽 아무 곳이나 선택)

Select object to offset or [Exit/Undo] <Exit>: (Enter키)

 

 

Command: c

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 5.5,18

Specify radius of circle or [Diameter] <1.5000>: d

Specify diameter of circle <3.0000>: 3

 

 

Command: offset

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] <1.0000>: 1

Select object to offset or [Exit/Undo] <Exit>: (원 B 선택)

Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: (원 안쪽 아무 곳이나 선택)

Select object to offset or [Exit/Undo] <Exit>: (Enter키)